سلام
یکی از دوستان یه برنامه اای برامون نوشته بود که وقتی هوا تاریک میشد یه ال ای دی با ocr شروع میکرد به چشمک زدن و یه پتانسیومتر بود که تنظیم میکردی تو چ موقع از روز شروع کنه به چشمک زدن (هوا از چه حدی تاریک تر شد )
برنامشو گرفتم و مدار بستم ولی کار نمیکنه
کدش اینه :
یکی از دوستان یه برنامه اای برامون نوشته بود که وقتی هوا تاریک میشد یه ال ای دی با ocr شروع میکرد به چشمک زدن و یه پتانسیومتر بود که تنظیم میکردی تو چ موقع از روز شروع کنه به چشمک زدن (هوا از چه حدی تاریک تر شد )
برنامشو گرفتم و مدار بستم ولی کار نمیکنه
کدش اینه :
کد:
[FONT=Yekan]#include <mega8.h>[/FONT] #include <delay.h> int x=150; #define ADC_VREF_TYPE 0x00 // Read the AD conversion result unsigned int read_adc(unsigned char adc_input) { ADMUX=adc_input | (ADC_VREF_TYPE & 0xff); // Delay needed for the stabilization of the ADC input voltage delay_us(10); // Start the AD conversion ADCSRA|=0x40; // Wait for the AD conversion to complete while ((ADCSRA & 0x10)==0); ADCSRA|=0x10; return ADCW; } // Declare your global variables here void main(void) { // Declare your local variables here int ldr; int res; // Input/Output Ports initialization // Port B initialization // Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out // State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0 PORTB=0x00; DDRB=0xFF; // Port C initialization // Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTC=0x00; DDRC=0x00; // Port D initialization // Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTD=0x00; DDRD=0x00; // Timer/Counter 0 initialization // Clock source: System Clock // Clock value: Timer 0 Stopped TCCR0=0x00; TCNT0=0x00; // Timer/Counter 1 initialization // Clock source: System Clock // Clock value: Timer1 Stopped // Mode: Normal top=0xFFFF // OC1A output: Discon. // OC1B output: Discon. // Noise Canceler: Off // Input Capture on Falling Edge // Timer1 Overflow Interrupt: Off // Input Capture Interrupt: Off // Compare A Match Interrupt: Off // Compare B Match Interrupt: Off TCCR1A=0xA3; TCCR1B=0x04; TCNT1H=0x00; TCNT1L=0x00; ICR1H=0x00; ICR1L=0x00; OCR1AH=0x00; OCR1AL=0x00; OCR1BH=0x00; OCR1BL=0x00; // Timer/Counter 2 initialization // Clock source: System Clock // Clock value: Timer2 Stopped // Mode: Normal top=0xFF // OC2 output: Disconnected ASSR=0x00; TCCR2=0x6A; TCNT2=0x00; OCR2=0x00; // External Interrupt(s) initialization // INT0: Off // INT1: Off MCUCR=0x00; // Timer(s)/Counter(s) Interrupt(s) initialization TIMSK=0x00; TIFR=0x00; // USART initialization // USART disabled UCSRB=0x00; // Analog Comparator initialization // Analog Comparator: Off // Analog Comparator Input Capture by Timer/Counter 1: Off ACSR=0x80; SFIOR=0x00; // ADC initialization // ADC Clock frequency: 125.000 kHz // ADC Voltage Reference: Int., cap. on AREF ADMUX=ADC_VREF_TYPE & 0xff; ADCSRA=0x83; // SPI initialization // SPI disabled SPCR=0x00; // TWI initialization // TWI disabled TWCR=0x00; while (1) { // Place your code here ldr=read_adc(0); ldr=(ldr*5)/1023; res=read_adc(1); res=(res*5)/1023; if (ldr<=res) { for(x=0;x<=255;x++) { OCR2=x; delay_ms(1); } for(x=255;x>=0;x--) { OCR2=x; delay_ms(1); } } PORTB=0; } }