کل مطالب تو سایت را خوندم ولی به نتیجه نرسیدم
من می خوام با DS 1307 ساعت را رو LCD نمایش دهم
هر کاری می کنم فقط 165 نمایش می دهی یعنی
165:165:165 165/165/165
موندم چه کار کنم!
کد را هم در زیز قرار می دهم یک نگاهی بهش بندازید و ایراد کارم را بگید
ضمنا برای میکرو از کریستال داخلی یا خارجی باید استفاده کنم؟
من می خوام با DS 1307 ساعت را رو LCD نمایش دهم
هر کاری می کنم فقط 165 نمایش می دهی یعنی
165:165:165 165/165/165
موندم چه کار کنم!
کد را هم در زیز قرار می دهم یک نگاهی بهش بندازید و ایراد کارم را بگید
ضمنا برای میکرو از کریستال داخلی یا خارجی باید استفاده کنم؟
کد:
/***************************************************** This program was produced by the CodeWizardAVR V2.05.3 Standard Automatic Program Generator © Copyright 1998-2011 Pavel Haiduc, HP InfoTech s.r.l. http://www.hpinfotech.com Project : Version : Date : 7/14/2013 Author : Timaaz Company : Timaaz Comments: Chip type : ATmega16L Program type : Application AVR Core Clock frequency: 8.000000 MHz Memory model : Small External RAM size : 0 Data Stack size : 256 *****************************************************/ #include <mega16.h> // I2C Bus functions #include <i2c.h> // DS1307 Real Time Clock functions #include <ds1307.h> #include <delay.h> #include <stdio.h> // Alphanumeric LCD functions #include <alcd.h> unsigned char h,m,s,wd,d,month,y; char lcdbuff[33]; int i; // Declare your global variables here void main(void) { // Declare your local variables here // Input/Output Ports initialization // Port A initialization // Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTA=0x00; DDRA=0x00; // Port B initialization // Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTB=0x00; DDRB=0x00; // Port C initialization // Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTC=0x00; DDRC=0x00; // Port D initialization // Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In // State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T PORTD=0x00; DDRD=0x00; // Timer/Counter 0 initialization // Clock source: System Clock // Clock value: Timer 0 Stopped // Mode: Normal top=0xFF // OC0 output: Disconnected TCCR0=0x00; TCNT0=0x00; OCR0=0x00; // Timer/Counter 1 initialization // Clock source: System Clock // Clock value: Timer1 Stopped // Mode: Normal top=0xFFFF // OC1A output: Discon. // OC1B output: Discon. // Noise Canceler: Off // Input Capture on Falling Edge // Timer1 Overflow Interrupt: Off // Input Capture Interrupt: Off // Compare A Match Interrupt: Off // Compare B Match Interrupt: Off TCCR1A=0x00; TCCR1B=0x00; TCNT1H=0x00; TCNT1L=0x00; ICR1H=0x00; ICR1L=0x00; OCR1AH=0x00; OCR1AL=0x00; OCR1BH=0x00; OCR1BL=0x00; // Timer/Counter 2 initialization // Clock source: System Clock // Clock value: Timer2 Stopped // Mode: Normal top=0xFF // OC2 output: Disconnected ASSR=0x00; TCCR2=0x00; TCNT2=0x00; OCR2=0x00; // External Interrupt(s) initialization // INT0: Off // INT1: Off // INT2: Off MCUCR=0x00; MCUCSR=0x00; // Timer(s)/Counter(s) Interrupt(s) initialization TIMSK=0x00; // USART initialization // USART disabled UCSRB=0x00; // Analog Comparator initialization // Analog Comparator: Off // Analog Comparator Input Capture by Timer/Counter 1: Off ACSR=0x80; SFIOR=0x00; // ADC initialization // ADC disabled ADCSRA=0x00; // SPI initialization // SPI disabled SPCR=0x00; // TWI initialization // TWI disabled TWCR=0x00; // I2C Bus initialization // I2C Port: PORTC // I2C SDA bit: 1 // I2C SCL bit: 0 // Bit Rate: 100 kHz // Note: I2C settings are specified in the // Project|Configure|C Compiler|Libraries|I2C menu. i2c_init(); // DS1307 Real Time Clock initialization // Square wave output on pin SQW/OUT: Off // SQW/OUT pin state: 0 rtc_init(0,0,0); // Alphanumeric LCD initialization // Connections are specified in the // Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu: // RS - PORTA Bit 0 // RD - PORTA Bit 1 // EN - PORTA Bit 2 // D4 - PORTA Bit 4 // D5 - PORTA Bit 5 // D6 - PORTA Bit 6 // D7 - PORTA Bit 7 // Characters/line: 8 lcd_init(20); delay_ms(50); lcd_putsf("test"); delay_ms(100); lcd_clear(); rtc_set_time(0,0,0); rtc_set_date(1,4,23,92); while (1) { rtc_get_time(&h,&m,&s); rtc_get_date(&wd,&d,&month,&y); sprintf(lcdbuff,"%02u:%02u:%02u %02u/%02u/%02u",h,m,s,y,month,d); lcd_gotoxy(0,0); lcd_puts(lcdbuff); delay_ms(100); for (i=0;i<=33;i+=1) { lcdbuff[i]=0 ; }; } }
دیدگاه