نسخه CodeVisionAVR V3.50 هم منتشر شد
V3.50 Commercial Release
Compiler
Added support for the AVR64DD14, AVR64DD20, AVR64DD28 and AVR64DD32
chips.
Added an additional check in مهمان عزیز شما حق دیدن لینک ها را ندارید
عضویت
fuses to prevent accidental UPDI disabling by
incorrect programming of the SYSCFG0.RSTPINCFG fuse bits for AVR8X Tiny chips.
Improved the code size for the DS1307, DS1621, DS3231, PCF8563, PCF8583 libraries
with TWI connection. Also for the DS1321 with bit-banged I2C.
Modified the FT5X06 touch screen controller library to be compatible with the AVR8X
chips.
Fixed in the Project|Configure|After Build menu: The Reset Pin configuration setting was
not saved for the AVR DA/DB chips.
CodeWizardAVR
For ATtiny87/167 chips: Added the possibility to disable the digital input buffers for ADC
inputs 8..11.
Updated the minimal/maximal ADC frequencies for AVR8X chips.
Fixed for AVR8X, DA, DB chips: Initializing the CPUINT.LVL0PRI and
CPUINT.LVL1VEC registers was not correct for non-default interrupt priority.
Fixed for AVR8X chips: the SET_SPIn_SS_LOW and SET_SPIn_SS_HIGH macros
defined in the generated spi_init.h header file were incorrect.
Fixed for AVR8X chips: In SPI initialization, writing to the SPI.CTRLB register reset the
SPI_ENABLE bit in the SPI.CTRLA register.
Fixed for AVR DA/DB chips: The USART RS485 operating mode has only two settings:
on or off. Also updated the AVR DA/DB header files to reflect that.
Fixed for Xmega and AVR8X chips: missing مهمان عزیز شما حق دیدن لینک ها را ندارید
عضویت
<ft5x06.h> in the generated
ports_init.c file when the capacitive touch screen controller was used.
IDE
Improved the detection speed of an USB COM port used for connecting to an Arduino
board.
Improved compatibility with Windows 11 installed on a computer without serial COM
ports.