اطلاعیه

Collapse
No announcement yet.

نرم افزارهای PLC

Collapse
X
 
  • فیلتر
  • زمان
  • Show
Clear All
new posts

    نرم افزارهای PLC

    لطفا در این بخش نرم افزار مخصوص PLC معرفی کنید.

    سلام به همه
    این نرم افزار آموزش و شبیه سازی PLC هستش.فقط demo هست .دوستان اگه سریال یا کرک پیدا کردن لطف کنن قرار بدن. ان شا الله مفید باشه


    http://www.industrial-ebooks.com/CBT_software/Bin95PLCDemo.exe

    (نقل قول از maysam)

    #2
    نرم افزارهای PLC

    دوستان عزیز سلام .
    این هم نرم افزار GMWIN 4 که قولش رو داده بودم . حدود 22 مگ هست . این نرم افزار مخصوص PLC های شرکت LG نوشته شده . ولی خوبیش اینه که نرم افزارش کاملا منطبق بر استاندار IEC61131-3 هست و کار رو برای ما راحت کرده .

    http://www.4shared.com/dir/340847/f92e4436/GMWIN4.html

    (نقل قول از محمد نحوی)

    دیدگاه


      #3
      نرم افزارهای PLC

      نرم افزار OMRON
      http://www.zen.omron.co.jp/eng/download/ZS400_Trial.EXE

      اینهم ورژن دموئه... اگر کسی کرکش رو پیدا کرد به ما هم یه ندایی بده...

      دیدگاه


        #4
        نرم افزارهای PLC

        سلام دوستان
        اینم لینک دانلود ورژن 5 نرم افزار معروف PLC یعنی LOGO!Soft Comfort

        https://www.automation.siemens.com/logo/html_00/support/01ToolsDownloads/index.html

        موفق باشید
        سخت ترين چيزي كه مي توان در زندگي ياد گرفت اين است كه از روي كدام پل
        بايد رد شد و كدام پل را بايد خراب كرد
        از سه چيز متنفرم 1- خيانت 2- دروغ 3- نامردي
        { خلاف قوانین - پاک شد }

        دیدگاه


          #5
          نرم افزار شبیه سازی PLC

          باسلام
          شما می توانید در آدرس زیر نرم افزار شبیه سازی PLC زیمنس S5 را همراه با مثال و توضیحات فارسی نرم افزار Download کنید.
          http://www.4shared.com/file/6403762/7c0737ca/S5_Softwar.html


          دود اگر بالا نشیند کسر شآن شعله نیست.
          جای چشم ابرو نگیرد گرچه او بالاتر است.

          دیدگاه


            #6
            SimuPLC 320 Eng

            SimuPLC 320 Eng
            سلام به همه بربچ 5 ولت و 380 ولت!
            این یه نرم افزار با قابلیت برنامه نویسی به وسیله کد و لدر دیاگرام .
            نرم افزاری جالب و کم حجمیه ولی به درد بخوره .
            http://www.andrebarbosa.eti.br/SimuPLC%20Eng/fpdb/InstallSimuPLC320%20Eng.exe

            دیدگاه


              #7
              پاسخ : نرم افزارهای PLC

              SimuPLC - Programmable Logic Controller Simulator
              1. The SimuPLC 3.2.0 - Simulador de Controlador Lógico Programável (programmable logic controller - PLC - Simulator) is offered free "as is", without any type of support, no guaranty neither warranty of whichever order or kind, neither any type of help or assistance in the installation, programming, training, utilization of the examples, resolution of eventual problems originated of the use or misuse of the software, etc.

              2. The Simulator in screen was designed and implemented purely for aid purposes in teaching and learning of the concepts and fundamental principles of the PLC equipments, providing simulation of its basic functioning and seeking to introduce programming facilities, by way of the project and implementation of a new language, specific for programmable control, the Linguagem de Comandos Elétricos (Electric Commands Language) - LCE.

              3. Although it can be made simulations of some more simple kinds of actual programs in development or production stage, such practice isn't encouraged in any way if the objective isn't purely to illustrate, facilitate and make more interesting teaching and apprenticeship of some forms of PLC-based programmable electro-electronic controls.

              4. That is, all and any applications of the SimuPLC 3.2.0 on development and/or production environments are expressly discouraged, even in elementary programs of control. Its objective is purely instructional, and its finality and motive of existence is so purely didactic.

              5. All codes in LCE or IL provided together to the SimuPLC 3.2.0 serves merely to the finality of illustration of its use, and they must not, in the whole or in part, under any circumstance, be utilized in effective programs of control before rigorous adaptation to the situation, to the installation and to the actual equipments where eventually they will be applied.

              6. I Alert too that the SimuPLC 3.2.0 does not substitute neither dispenses any literature in the area, this one will must be fully studied and assimilated for, inclusive, better understanding and utilization of the Simulator.

              7. All user is free to:

              i) distribute the SimuPLC 3.2.0 free of charge, as long as it's not by Internet way and he musts give knowledge of these "Terms and Conditions of Use" at the moment of the distribution;

              ii) utilize it as well as please him/her, keeping always the information of the original copyright.

              8. When the user obtains the installer, installs the SimuPLC 3.2.0, or utilizes it in any case, he/she will be tacit and implicitly agreeing with the Terms and Conditions above.

              http://www.andrebarbosa.eti.br/SimuPLC%20Eng/fpdb/InstallSimuPLC320%20Eng.exe

              دیدگاه


                #8
                پاسخ : نرم افزارهای PLC

                سلام

                دوستان کسی نسخه ی کامل LOGO!Soft Comfort رو نداره؟ این نسخه ی دموش خیلی محدودیت داره و حجم اش هم 48 مگه در حالی که نسخه ی کامل اش حدود 400 مگا بایته!

                There is nothing so practical as a good theory. — Kurt Lewin, 1951

                دیدگاه


                  #9
                  پاسخ : نرم افزارهای PLC

                  نوشته اصلی توسط *محمد*
                  سلام دوستان
                  اینم لینک دانلود ورژن 5 نرم افزار معروف PLC یعنی LOGO!Soft Comfort

                  https://www.automation.siemens.com/logo/html_00/support/01ToolsDownloads/index.html

                  موفق باشید
                  با سلام من دانلودش کردم ولی جواب نمیده! ممنون میشم اگه راهنمایی کنید.

                  دیدگاه


                    #10
                    پاسخ : نرم افزارهای PLC

                    یه لینک از این پی ال سی ها میزارم مال شرکت تبین هستش نرم افزارشم سعی میکنم به زودی up loud کنم این برنامه انقدر اسونه که یه بجم می تو نه بهگه پی ال سی کار کردم
                    این لینک برنامه های شبیه سازشه
                    به دری وری های آلمانی اون نگاه نکنید
                    http://www.theben.de/simulationen0.html?&no_cache=1&L=1
                    اینم مال pdf
                    http://www.theben.de/datenbltter.html?&no_cache=1&L=1
                    دوباره می سازمت وطن اگر چه با استخان خویش

                    دیدگاه


                      #11
                      پاسخ : نرم افزارهای PLC

                      نوشته اصلی توسط farshad
                      دوستان عزیز سلام .
                      این هم نرم افزار GMWIN 4 که قولش رو داده بودم . حدود 22 مگ هست . این نرم افزار مخصوص PLC های شرکت LG نوشته شده . ولی خوبیش اینه که نرم افزارش کاملا منطبق بر استاندار IEC61131-3 هست و کار رو برای ما راحت کرده .

                      http://www.4shared.com/dir/340847/f92e4436/GMWIN4.html

                      (نقل قول از محمد نحوی)
                      کارت درسته اقا فرشاد
                      من خودم ورژن 4.1 این نرم افزار رو دارم ولی فایل های ذخیره شده رو باز نمی کنه ! :exclaim: خودتون با این نرم افزار کار کردین ؟ مشکلی نداره ؟
                      کمتر به سایت میام .....

                      دیدگاه


                        #12
                        پاسخ : نرم افزارهای PLC

                        من نرم افزار plc شرکت زیمنس رو می خوام

                        دیدگاه


                          #13
                          پاسخ : نرم افزارهای PLC

                          نرم افزار های شرکت زیمنس در فروشگاه سایت وجود دارند.
                          www.eshop.eca.ir

                          دیدگاه


                            #14
                            پاسخ : نرم افزارهای PLC

                            کب گفت کرک نداره!
                            القصه کرک داره ولی کار ردست تر
                            چون طی انلگولک کاری های ند ترمه توی آزمایشگاه ( همراه با تست های منطبق با استانداردهای آشپزی ) هیچ ایرادی از خودش نشون نداد
                            من یکی گرفتم و هیچ مشکلی نداشت مخصوصا اون قسما شبیه سازی پروژه که همیشه با error های کذائی اعضابمو خورد می کرد

                            همین

                            دیدگاه


                              #15
                              پاسخ : نرم افزارهای PLC

                              رضا جان .... کرک فقط اسمش رو پروفشنال میکنه نه امکاناتش رو می تونی از همون نمایندگی هاش هم بپرسی تا توضیح بدن. اللبته S5 کرک داره ولی S7 هرکیم بگه کرک شدش امکانات کامل داره باور نکن !

                              دیدگاه

                              لطفا صبر کنید...
                              X